One-Minute Read
3D printing for engineers works best as a service: you send the CAD, and a specialist turns it into finished, checked parts on industrial machines your team doesn’t have to buy, run or maintain.
- Outsource 3D printing when the job needs a process, material or quantity beyond a desktop FDM printer. Keep quick concept prints in-house.
- Send a STEP file, plus a PDF drawing for any critical dimension, thread or tolerance.
- Lead time is more than print time. Queue, post-processing, inspection and freight all add days.
- Part volume, process and material usually drive the price most, followed by finish and quantity.
An Australian service keeps the work local, with no import delays, design reviews in your own time zone, and remakes that don’t need international freight.
Introduction
3D printing services for engineers exist for one common situation: you need a real part this month, nobody in the team has a suitable printer, and you’re not sure what to send or what will come back.
The overlap between 3D printing and engineering now runs from the first fit-check model to end-use brackets, housings, jigs and spare parts. So the useful question is no longer whether to use additive manufacturing. It’s how to brief a supplier so the first part is the right part.
This guide is written for design engineers, engineering managers and procurement teams across Australia. It covers when to outsource, how to order, which process suits which job, realistic lead times, what drives cost, and what to check before you choose a service.
After years of turning engineers’ CAD into parts at CAD Deziners, one pattern stands out. When a first order goes wrong, the printer is rarely the cause. The brief usually is.
What a 3D printing service actually does for an engineering team
In 3D printing in engineering, a service bureau is the supplier that checks your CAD, builds it on industrial machines, finishes and inspects the parts, then delivers them to your site.
The work splits cleanly between you and the service. Knowing where the line sits saves most of the back-and-forth on a first order.
What you provide
- The CAD model, ideally as a STEP file, plus a drawing for anything critical
- What the part has to do: load, temperature, chemicals, fit with other parts
- Quantity, deadline and delivery address
What the service provides
- Advice on the process and material that suit that requirement
- A design-for-manufacture check before anything is built
- The build itself, support removal and finishing
- Dimensional checks, packing and freight
A shared vocabulary helps too. The international standard ISO/ASTM 52900:2021 defines the terms used in additive manufacturing, and ISO last reviewed and confirmed it as current in 2025. When a quote mentions a process category or build term, that standard is the neutral reference both sides can point to.
A service is not a design authority. It builds to your data and advises on manufacturability. It doesn’t approve your design, take on your engineering responsibility or certify a part for a regulated application unless that’s agreed in writing. That’s why the “what the part has to do” list matters more than the file format.
Who needs 3D printing services in Australian engineering?
Who needs 3D printing services in engineering comes down to roles more than industries: design engineers, maintenance and reliability teams, product developers, R&D groups, and the procurement staff who buy for them.
The jobs differ by sector, but the pattern is the same: a part is needed quickly, in small numbers, or in a shape that’s hard to machine.
- Mining: replacement covers, guards and equipment housings for site trials, often for gear whose original parts are no longer made. See 3D printing in the mining sector.
- Rail: metal and polymer parts for maintenance and refurbishment programs. See metal printing in the railway sector.
- Defence and aerospace: fit-check models, tooling and prototypes. Flight or service parts need a qualified process first.
- Automotive: jigs, fixtures and low-volume brackets for specialist vehicles and aftermarket work.
- Bio and healthcare: device housings and anatomical models for development and planning.
- Electronics: enclosures and mounting parts that change with every board revision.
- Ship maintenance: replacement parts for vessels where the original supplier’s lead time is longer than the repair window.
What is 3D printing in mechanical engineering, and where does it fit?
When people ask what is 3D printing in mechanical engineering, the short answer is a manufacturing method that builds parts layer by layer straight from CAD, with no tooling.
Asking is 3D printing mechanical engineering is a bit like asking whether a lathe is: it’s a tool mechanical engineers use alongside machining, casting and moulding, not a discipline in itself.
Where 3D printing and engineering meet most usefully is across the development cycle. Each stage calls for a different kind of printed part:
- Concept model: a quick, low-cost print to check size, layout and ergonomics before detailed design starts.
- Fit and form check: a part printed to the CAD to confirm it mates with real components, fasteners and cable runs.
- Functional test: a nylon or metal part that’s loaded, heated or cycled to find where the design gives way. The result applies to that process and build orientation, not to every way the part could be made.
- Jigs and fixtures: holding, locating and inspection aids for the workshop or production line.
- Bridge production: small batches while injection mould tooling is being made, or for products that never reach moulding volumes.
- Spare parts: replacements for equipment whose original supplier has gone or quotes months of lead time. See rapid repair and replacement parts for power plant maintenance.
One common mix-up is worth clearing up. 3D printing is one way to do rapid prototyping, not another name for it. CNC machining and vacuum casting are also used to make prototypes. The differences between 3D printing and rapid prototyping explains the distinction.
3D printing fits less well when volumes run into the thousands of identical plastic parts. There, injection moulding usually wins on unit cost once the tooling is paid off. For simple blocks and plates with tight tolerances, a machined part is often the more straightforward answer.
Should you outsource 3D printing or keep it in-house?
You should outsource 3D printing when a job needs a process, material or quantity you can’t run well yourself. Keep simple, frequent FDM prints in-house, where same-day turnaround matters.
Most engineering teams end up doing both. The next two sections show where each side earns its place, then give a quick test for the parts in between.
In-house 3D printing: where a desktop printer earns its keep
In-house 3D printing suits quick concept models, fit checks and simple jigs in common FDM materials such as PLA, PETG and ABS, where printing overnight beats waiting for a courier.
The printer’s purchase price is the smallest part of the bill. Someone has to run it, clear failed builds, replace nozzles and build plates, keep filament dry and remove supports. That time usually comes from an engineer, whose hourly cost is well above the machine’s.
A desktop FDM printer also limits what you can test. Glass-filled nylons, high-temperature polymers and metal parts need different machines. Benchtop SLS printers do exist, but industrial SLS and MJF systems need dedicated space, powder handling and trained operators. Metal powder bed fusion machines add inert gas and stricter powder safety on top of that.
The honest advantage of printing in-house is iteration speed: change the CAD at 4 pm and hold the part at 9 am. That’s why most teams run a hybrid. They print concept and fit-check parts in-house, and send functional and end-use parts out. When an FDM job outgrows your desktop machine, for example because the part is too large or needs an engineering-grade filament, an outside FDM printing service fills the gap.
The outsource test: five questions before you buy a printer
If you’re wondering can you outsource 3D printing for some jobs and keep others in-house, the answer is yes, and five questions show which way each job should go.
We call it the five-question outsource test:
- How many hours a week would a printer really run? If it’s only a few, the machine sits idle most of the time while still costing you floor space, maintenance and depreciation.
- Do you need materials beyond PLA, PETG or ABS? Engineering nylons, flame-retardant grades, high-temperature polymers and metals point to a service.
- What tolerance and surface finish does the part need? Tight fits or a cosmetic finish on the drawing call for industrial machines, post-processing and dimensional checks.
- Who will run, maintain and post-process the printer? If the honest answer is “whichever engineer has time”, count those hours as a cost.
- Will quantities jump from 1 to 50 or more at release? Batch production needs capacity and part-to-part repeatability that one desktop printer can rarely give.
If two or more answers point outward, outsourcing is usually the lower-risk route for that job. Treat the test as a rule of thumb from practice, not a cost model. For a full comparison, cost the printer, materials and labour over its working life, and set that against a few real quotes for your typical parts.
How to order 3D printed parts: the engineer’s workflow
Here’s how to order 3D printed parts in seven steps, from uploading the CAD to signing off the delivered part, with what you supply and what comes back at each step.
If you’re working out how to outsource 3D printing for the first time, this is the sequence to expect:
- Upload the CAD. You send the model files. Start by choosing to upload your CAD file. For several parts, zip them into one upload.
- Choose a material and state the requirements. Pick a material, or select “Do not know” if you want advice. Send the quantity, finish and any critical features with your files.
- Get the quote. You receive an instant online quote to review and approve.
- Manufacturability check. Before the build, a good service checks the file for walls, overhangs, trapped material and orientation (see the DfAM review below). Ask for any proposed change to be flagged before printing, not after.
- Build. The parts are printed in the agreed process, material and orientation.
- Post-process and inspect. Supports come off, the agreed finish is applied, and critical dimensions are checked against your drawing.
- Deliver and sign off. The parts arrive at your site. Check them against your requirement list and report any issue quickly, while the build data is still fresh.
What to send: STEP, STL or 3MF, plus the drawing that saves a remake
Send STEP for engineering parts, because it keeps the exact solid geometry, and use STL or 3MF only when you already have a print-ready mesh.
The difference matters. An STL file is a surface made of triangles, and it carries no units. A part modelled at 50 mm can be read as 50 inches if the software guesses wrong. A 3MF file stores its units and is built around closed, watertight geometry. A STEP file lets the service re-mesh at the right resolution and adjust holes or threads if you agree to it.
A mesh can’t carry a tolerance, so send a PDF drawing whenever tolerances, threads, datums or critical faces matter. The upload page accepts .step/.stp, .stl, .3mf, .iges, .obj and .zip files up to 70 MB per upload. Put the STEP and the drawing in one zip file, or email multiple files to info@caddeziners.com.au.
If an STL is all you have, prepare it like this before uploading:
- Export in millimetres, with a chord tolerance fine enough that curved faces don’t facet.
- Check that the mesh is watertight, with no gaps, holes or inverted faces.
- Use one part per file, or name each body clearly in an assembly.
- Put the revision in the file name, for example bracket_revC.step, so the right version gets printed.
The DfAM review: what a good service checks before printing
Design for additive manufacturing (DfAM) means shaping a part around how it will be built, layer by layer, rather than how it would be machined or moulded.
The international guidance is ISO/ASTM 52910:2018, which Standards Australia adopted as AS ISO/ASTM 52910:2020. In practice, a pre-build review looks at six things:
- Walls and small features: whether thin walls, pins and text sit above the minimums for the chosen process. The limits differ between FDM, SLA, SLS and metal.
- Overhangs and supports: where supports will touch the part, and whether they’ll mark a functional face.
- Trapped material: whether enclosed cavities will hold unsintered powder or uncured resin, and need escape holes.
- Holes and threads: whether to print undersize and ream, fit heat-set inserts, or print the thread, depending on the process and load.
- Orientation against load: layers usually bond less strongly than the material within each layer. The part is oriented so the main load doesn’t pull the layers apart.
- Part consolidation: whether an assembly of several machined parts can become one printed part.
A short review before the build costs far less than a remake. That’s especially true on SLS or metal, where one build can hold many parts. For the CAD side of the same thinking, see our guide to design for 3D printing.
3D printing for engineers: matching the process to the job
3D printing for engineers starts with the job, not the machine. Decide what the part has to prove or do, then pick the process that does it best at the quantity you need.
The main options are fused deposition modelling (FDM), stereolithography (SLA), selective laser sintering (SLS), Multi Jet Fusion (MJF), PolyJet and metal powder bed fusion, which suppliers often call DMLS or SLM. This is how they line up against common engineering jobs:
| Engineering job | First-choice process | Why | Avoid it when |
|---|---|---|---|
| Fit and form check | FDM, or SLA for small, detailed parts | Fast and low-cost for checking size, clearance and mating | You need a smooth surface or features finer than FDM can resolve |
| Functional prototype under load | SLS or MJF nylon (PA12) | A true thermoplastic that behaves like an engineering plastic, with no support marks | The main load pulls across the layers and you haven’t checked the Z-direction data |
| Snap fits and living hinges | SLS or MJF nylon | Nylon flexes repeatedly where most standard resins crack | The hinge is oriented to bend across the layers instead of along them |
| Detailed or smooth master for vacuum casting | SLA, or PolyJet | A smooth surface and fine detail transfer cleanly into the silicone mould | The master itself has to carry a load |
| Low-volume end-use parts | SLS or MJF nylon, or FDM in engineering filaments | Durable thermoplastics that repeat well in batches | The quantity justifies injection mould tooling |
| Metal parts | Metal powder bed fusion (DMLS/SLM) | Dense metal parts with internal channels and shapes that can’t be machined | A simple block or plate that a CNC machine can cut faster and for less |
For a deeper look at the two most-compared resin and powder processes, see SLA vs SLS.
Datasheet strength is not part strength
The most common misread in process selection is taking a material’s headline tensile strength as the strength of the printed part. Printed parts are built in layers, so their properties can change with direction.
EOS’s material data sheet for PA 2200, a widely used SLS nylon, shows the gap clearly. It lists tensile strength of 48 MPa in the X and Y directions and 42 MPa in Z, a 6 MPa difference. The bigger gap is in ductility. Strain at break is 18% in X and Y but only 4% in Z (ISO 527, dry). A part loaded across its layers stretches less than a quarter as far before it breaks. EOS’s newer “Performance” parameter set lists 50 MPa in all three directions, which shows that the build settings matter as much as the material name.
The practical rules:
- Ask which datasheet and parameter set apply to your parts.
- Orient the part so the main load runs along the layers.
- Treat datasheet figures as coupon results, not a guarantee for your geometry.
Material choice comes next. See 3D printing materials for that. For what each process can hold dimensionally, see 3D printing tolerances.
How long do 3D prints take through a service?
How long do 3D prints take depends on which clock you mean. Machine time is often a matter of hours, while the lead time to your door is measured in days.
For an outsourced engineering part, the delivered lead time breaks down like this:
Lead time = print time + queue + post-processing + inspection + freight
- Print time: set by part height, volume, process and how many parts share the build. SLS and MJF builds also need time to cool before parts can be unpacked.
- Queue: your job waits for a machine running the right material. Powder processes are batched, with several jobs sharing one build to fill the chamber.
- Post-processing: support removal, bead blasting, dyeing or plating, and heat treatment or machining for metal parts. Finishing often takes longer than printing.
- Inspection: dimensional checks against your drawing. A first-article report adds time but saves arguments later.
- Freight: delivery is available across Australia. Allow extra days for WA, the NT and remote mine sites.
At 3D Printings, standard turnaround is typically 5–10 days. When you confirm specs on the quote, you can select a lead time that suits your schedule. The team confirms the expected lead time before production starts.
The common planning mistake is taking the build hours from a slicer estimate and treating them as the schedule. Plan around the delivery date instead, and tell the service the date the part has to be on site, not when you’d like it printed.
A few things reliably shorten the wait:
- Send a clean STEP file and drawing the first time, so there are no clarification emails.
- Choose a common material where the application allows.
- Accept the standard finish unless the part’s function needs more.
- Freeze the design revision before you approve the quote.
Why are 3D printing services so expensive, and how do engineers cut the cost?
The answer to why are 3D printing services so expensive is that you pay for industrial machine time, engineering-grade material, finishing and inspection labour, and the risk of a failed build, which the service carries instead of you.
Asking how much does it cost to outsource 3D printing is like asking what a machined part costs. It depends on volume, process, material, finish and quantity. That’s why an instant quote on your actual file tells you more than any price table.
These are the cost drivers, roughly in order of impact for most engineering parts:
- Part volume: material used and, for most processes, build time. Solid, thick sections cost more than they need to.
- Process: metal powder bed fusion sits at the top of the cost range, and polymer processes cost far less per part.
- Material: glass-filled, flame-retardant and high-temperature grades cost more than standard nylon or PLA.
- Orientation and supports: taller builds take longer on layer-by-layer processes, and supports add material plus removal labour.
- Finish: dyeing, smoothing, painting and plating add hand work.
- Quantity: the per-part price usually falls as a batch fills a build, without the big tooling step that moulding has.
Engineers control most of these drivers at the CAD stage. Five levers make the biggest difference:
- Hollow or lattice non-critical bulk, with escape holes on SLS and SLA parts so powder or resin can drain out.
- Orient to cut height and supports, where the load direction allows.
- Let parts nest: on powder processes, compact shapes pack more parts into one build.
- Consolidate assemblies: one printed part can replace several machined parts and their fasteners.
- Loosen non-critical tolerances and finishes: call up tight tolerances only on the features that need them.
The cheapest part quote isn’t always the cheapest project. Count design time, iterations, rejects, inspection, freight and the cost of a remake if a fit fails. A part that costs more but fits first time usually comes out ahead.
For the wider question of when printing pays at all, see is 3D printing cost-effective. When quantity or simple geometry tips the balance the other way, compare CNC machining vs 3D printing.
Post-processing and inspection: what engineers should specify
A 3D printed part isn’t finished when it comes off the machine. It’s finished when its post-processing and inspection match your requirement, and you usually have to ask for both.
Choose finishing by what the part needs to do:
- Support and powder removal: always done. Ask how critical faces will be kept free of support marks.
- Bead blasting: gives an even matte surface on SLS, MJF and metal parts and clears loose powder.
- Dyeing: colours nylon parts all the way through, so scuffs don’t show.
- Sealing or smoothing: for parts that must keep dirt out or hold fluid.
- Chrome plating: 3D Printings plates SLA, SLS PA12, FDM and PolyJet prints in-house. Ask whether decorative or hard chrome suits the part. See chrome plating for 3D printed parts.
Metal parts need more. Metal AM magazine lists the typical steps: powder removal, stress relieving, removal from the build plate, support removal, surface finishing and, depending on the application, heat treatment or hot isostatic pressing (HIP). Critical bores, faces and threads are often machined after printing to reach tolerance. Ask which steps your supplier does in-house and which it subcontracts, because each one adds lead time.
For outdoor parts in Australia, specify UV exposure. ARPANSA notes that Australia experiences some of the highest levels of solar UV radiation in the world, and many unprotected polymers degrade in sustained sun. See why UV-protected 3D printed parts matter outdoors in Australia.
Then specify the inspection evidence you need:
- Critical dimensions: mark them on the drawing, with tolerances, so those are the features that get measured.
- First-article report: a measured record of the first part before a batch runs. Without one, problems show up across the whole batch.
- Photos or a video call: for remote sign-off when you can’t inspect the part on site.
- Material traceability: the material grade and batch, if your quality system or customer requires it.
Asking for these up front costs little. Discovering on assembly day that nobody measured the bore costs a lot more.
Where can I get a part 3D printed in Australia?
If you’re asking where can I get a part 3D printed, you have three realistic options: your own in-house printer, an Australian 3D printing service, or an overseas online platform. Choosing where to order 3D printed parts usually comes down to four things: lead time, freight, support and IP.
Each option suits a different job:
- In-house printer: quick concept and fit-check prints in common FDM materials.
- Australian service: functional and end-use parts that need engineering-grade materials, design feedback and a reliable delivery date.
- Overseas platform: price-driven, non-urgent parts that aren’t sensitive, where a slower delivery or a remake by post is acceptable.
For 3D print outsourcing, local and overseas suppliers compare like this:
- Delivery and freight: a domestic courier against international freight plus customs clearance. Remote sites add days either way.
- Import charges: the ATO states that for consignments over A$1,000, GST, customs duty and clearance charges are charged to the importer at the border. GST-registered businesses can usually claim back the GST, so the real extra cost is duty, clearance charges, broker fees and the time to clear.
- Time zone: design and DfAM questions get answered the same working day, not overnight.
- IP and NDAs: your CAD stays with a supplier bound by an agreement under Australian law.
- Remakes: a non-conforming part can be sent back and remade without a second international shipment.
Good 3D printing services for engineers make these trade-offs visible on the quote, with lead time, finish, inspection and freight priced up front rather than discovered later.
3D Printings is the 3D printing service operated by CAD Deziners, an Australian engineering design company. Parts, including metal parts, are made in Australia, quotes are instant and online, and standard turnaround is typically 5–10 days. The business has operated for more than eight years and delivers across Australia. Engineers can also start from the Melbourne and Sydney service pages.
The engineer’s RFQ checklist for choosing a 3D printing service
A good request for quote (RFQ) answers eight questions up front, and the right 3D printing service will ask about them anyway if you leave them out.
Use this as the brief you send with your files:
- Quantity now, and the likely quantity at release
- Material, or the property you need if you’re unsure (heat, flex, chemical resistance)
- Critical dimensions and tolerances, marked on a drawing
- Load case and environment: temperature, UV, chemicals, moisture
- Surface finish and colour, where they matter to function
- Inspection evidence you need, such as a dimensional report or photos
- Delivery site, and the date the part must be there
- NDA or IP terms, if the design is confidential
Then ask the service four questions of your own:
- Which processes and post-processing steps do you run in-house, and which do you subcontract?
- Can you trace the material grade and batch used for my parts?
- How do you report dimensions, and against which features?
- Who reviews my file for DfAM before it’s built, and will I see their comments before I approve the job?
Specific answers are the best sign you’ve found the right supplier. “We can do anything” is not a specific answer.
When you need design help too: CAD, 3D scanning and reverse engineering
Some 3D printing services can also create or fix the CAD, which matters when all you have is a worn part, a hand sketch or a legacy 2D drawing.
3D Printings is run by CAD Deziners, an Australian firm of engineers and drafters. Its design side covers mechanical drafting, new product development, 3D scanning and 3D laser scanning, and FEA analysis, with the team working in SolidWorks, Inventor, CATIA and AutoCAD.
When no drawing survives, scanning the worn or obsolete part and rebuilding it as clean CAD (reverse engineering) is often the fastest route to a printable replacement.
Keeping design and printing with one supplier removes the handover errors that creep in when a model passes between two companies. The people who draw the part also know how it will be built. See CAD Deziners engineering design.
Start with one part: a low-risk first order
The safest way to test a 3D printing service is to send one non-critical part first and judge it on three things: the quality of its DfAM feedback, the finish, and whether it arrives on the promised date.
Keep the first order simple:
- Send a STEP file and a PDF drawing, with the critical features marked.
- Ask for DfAM comments before you approve the quote, and note how specific they are.
- When the part arrives, check it against your RFQ checklist, not just by eye.
If the part, the paperwork and the conversation all hold up, you’ve found a supplier you can trust with the parts that matter. When you’re ready, get an instant quote on your first part.

Ashish Magoo is an Engineering Manager at CAD Deziners with over 10 years of experience in product design, prototyping and manufacturing. He guides engineering teams and shares practical insights on CAD design, product development, 3D printing, reverse engineering and manufacturing processes.
Areas of expertise
- Product Design
- CAD Engineering
- Prototyping
- 3D Printing
- 3D Scanning
- Manufacturing